Prevent water waste with quick and piping hot water Now you can have hot water in 25-45 seconds (depending on the size of the home and water system) without wasting a single drop and by using only a fraction of a cent's worth of electricity. Using the existing hot and cold water lines, the Metlund® Hot Water D'MAND® System rapidly displaces the ambient temperature water in the hot water line with hot water coming from the water heater. It returns this ambient temperature water through the cold water line to the water heater without letting any water run down the drain or bringing new, colder water into the house. Once hot water has reached the fixture, the sensor closes the valve and turns off the pump not allowing hot water to enter the cold water line. The system is operated on demand, generally running for less than a minute each time it is activated. Because the lines do not have the flow restrictions of the fixtures, less water is drawn from the water heater and it arrives at a hotter temperature more quickly. How it works: The Hot Water D'MAND System can be easily retrofitted or installed new on any home (including manufactured homes and large pleasure craft) or business, regardless of how the building is plumbed for hot water. However, in new construction, Structured Plumbing™ should be incorporated into the design, so that the entire hot water distribution system is more effective. Features: The Metlund Hot Water D'MAND System consists of a high performance circulating pump, electronic zone valve, electronic control circuit board and various activating controls. It can be installed with any water heating system: gas, electric, propane, tank, solar or tank-less heaters. In most retrofit applications, the Hot Water D'MAND System is installed at the fixture furthest from the water heater. Its features include: Automatic "fail-safe" 3-year (S-51, S-71T and S-03) warranty Life expectancy 15 to 20 years Less than $2.00 a year to operate Delivers hot water within seconds to more than one fixture Delivers hot water without wasting cold water down the drain System only operates when there is a demand for hot water Simple installation for new and existing homes Works with all standard water heaters (gas, electric, instantaneous, propane and solar hot water) "No Sweat" easy installation package available with optional remote control button Australian Standards ATS 5200.464-2004 UL Listed and IAPMO Approved Savings of energy and water, plus extending the life of water heaters, has a significant return on investment. Building regulations require the use of low flow fixtures (9 litre restrictors on showers). Since eight out of ten homes have long waits for hot water at one or more fixtures, it is easy to see the added convenience and cost savings of instant hot water delivery. You can see the D'MAND® System at any of Marbletrend's Showrooms around Australia. See below or click here to see their profile here at homeandgarden.com.au MARBLETREND* HEAD OFFICE (VICTORIA) Address: 22 Jersey Road, Bayswater 3153 Postal: PO Box 43, Bayswater, 3153 Phone Number: 03 9729 6777 Facsimile: 03 9729 0115 Showroom Hours:8.30am to 4.30am Mon-Fri, 9.00am to 12.00 noon Sat MARBLETREND* NSW/ACT Unit 1/208 Walters Road Arndell Park NSW 2148 t | 02 9679 8888 f | 02 9679 8700 e | nswsales@marbletrend.com.au MARBLETREND* SA RD Agencies Pty Ltd 3 Boulder Court Morphett Vale SA 5162 t | 08 8387 7344 f | 08 8387 7355 MARBLETREND* QLD 5 - 7 Blue Eagle Drive Meadowbrook QLD 4131 t | 07 3200 7555 f | 07 3200 5777 e | qldsales@marbletrend.com.au MARBLETREND* FAR NORTH QLD Northern Agencies & Distribution Unit 1/9 Keane Street Currajong QLD 4812 t | 07 4775 5784 f | 07 4725 8480 MARBLETREND* WA 11 Cresall Road Balcatta WA 6021 t | 08 9240 7299 f | 08 9240 6144 e | wasales@marbletrend.com.au MARBLETREND* TAS Allan Powell Agencies Warehouse 2, 19 Dowling Street Launceston TAS 7250 t | 03 6334 2992 f | 03 6334 2994 MARBLETREND* DARWIN Northern Agencies & Distribution 12A Tang Street Coconut Grove NT 0810 t | 08 8948 5062 f | 08 8985 3465